|
|
 
|
Use WSF 2570 is a liquid blend of slag modifiers designed to prevent deposits on boiler firesides through a catalyzed reaction with vanadium, sodium, nickel and sulfur. It will prevent the formation of low melting vanadium pentoxide, sodium and nickel vanadates and sodium sulfate.The application of WSF 2570 will also minimize the rate of fireside corrosion.
Features WSF 2570 Fuel oil treatment is a highly concentrated liquid blend of high alkalinity organometallic ash modifiers and stabilizers. The reactions between fuel oil ash components and ash modifiers are accelerated by a select organometallic catalyst.
Feeding WSF 2570 treatment may be added directly to the fuel oil storage tank or pumped continuously to the fuel oil line. Addition to the fuel oil line must be far enough before the burner to insure good mixing prior to combustion. The dosage rate of WSF 2570 will depend upon the fuel oil composition, operating conditions, the nature and severity of fireside problems and treatment program objectives. The dosage will normally fall within the range of 0.10 - 0.40 liters per ton of fuel burned. The optimum dosage will depend primarily upon the sulfur and vanadium content of the fuel oil.
Handling precautions Avoid contact with eyes, skin and clothing. Wear protective gloves and goggles while handling. Wash thoroughly after handling. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes and seek medical attention. Flush skin with water. In case of spill, absorb with inert material. Flush area with water. Before use review the Material Safety Data Sheet for additional information..
Labelling for handling Symbol : Xn; Harmful
Packaging WSF 2570 is packed in 30 and 125 kg drums.
|
|
|
