The WSF E-2650 Micro-Emulsifier Additive provides a cost-effective means for utility, marine and industrial fuel users to deal with increasingly stringent environmental restrictions on emissions and the deteriorating quality of residual fuel oil or bunker "C" oil.

Much of the existing equipment used to burn today's available residual fuel oil cannot do so and remain within environmental compliance with acceptable operating costs.

WSF E-2650 Micro-Emulsified Fuel is a suspension of microscopic water droplets in residual fuel oil, containing adequate additives as to provide secondary atomization operation. WSF E-2650 Micro-Emulsifier Additive produces an emulsion under controlled, steady state conditions with proper water content, optimum water droplet size range and proper stability. These emulsion characteristics are critical to obtaining maximum combustion performance.

	Utility and industrial boilers that cannot comply with present emission standards on particulate, NOx or opacity.
	Utility and industrial boilers that are operating at reduced efficiency or high operating costs due to poor performance.
	Process furnaces and kilns that cannot comply with present emission standards.
	Process furnaces and kilns operating with high maintenance costs, low product yield or low product quality due to poor combustion.
	Marine or industrial diesel engines that are operating under smoking conditions, reduced efficiency or high operating costs due to poor performance.

 

Performance

Exact quantitative improvement in performance benefits will vary according to the severity of combustion-related problems.

The potential performance benefits of burning WSF E-2650 Emulsified Fuel over neat residual fuel oil are:

	Increased boiler utilization or operating time
	Improved combustion
	Reduction in NOx emissions.
	Increased efficiency.
	Decreased particulate emissions.
	Decreased high and low temperature corrosion in boilers.
	Decreased soot blowing frequency in boilers.
	Reduction or elimination of fireside additives.
	Decreased maintenance costs.
	Increased product yield or quality in process furnaces.

 

Safety and Handling

WSF E-2650 Micro-Emulsifier Additive contains hydrocarbons (CAS #64742-94- 5), designated by the Occupational Safety & Health Administration (OSHA) as a hazardous ingredient.

Use of WSF E-2650 Micro-Emulsifier Additive in the presence of strong acids and oxidizers should be avoided.

Contact with skin and eyes may cause irritation, and inhalation may cause dizziness and headaches.

Additional safety and handling information is contained in a Material Safety Data Sheet available upon request.